Mining economics
Hashprice: from hashrate to daily revenue
Learn the units, calculate gross revenue and separate it from operating profit.
Read guide ↗ASIC.TOOLS / KNOWLEDGE
Learn
Practical guides for choosing, running and maintaining mining hardware. Start with the basics, then apply the examples to your own equipment.
Guides found: 26
Choosing equipment
Choosing an ASIC: algorithm, efficiency and infrastructure
Compare exact configurations, not headline hashrate alone.
Read guide ↗
Mining economics
Profitability and payback: build a realistic scenario
Include the whole investment, test adverse conditions and keep cash flow separate from a forecast.
Read guide ↗
Setup and maintenance
First ASIC startup: power, network and the first shares
A practical sequence from unpacking to a stable pool connection.
Read guide ↗
Setup and maintenance
Mining pools: shares, payouts and connection problems
Understand what a pool credits and diagnose differences between local and pool hashrate.
Read guide ↗
Setup and maintenance
ASIC maintenance: cooling, firmware and fault diagnosis
Build a maintenance routine and investigate faults without hiding them through repeated restarts.
Read guide ↗
Network and pools
Finding a miner on your network: DHCP, IP and DNS
A step-by-step route from an unknown device address to a working pool connection.
Read guide ↗
Network and pools
Backup pools: configure and test failover
Keep a primary connection and a verified fallback without sending work to the wrong account.
Read guide ↗
Network and pools
Rejected and stale shares: diagnose the cause
Distinguish connection delays, configuration errors and unstable hardware before changing performance settings.
Read guide ↗
Setup and maintenance
Updating ASIC firmware without disrupting the whole farm
Plan compatibility checks, a pilot update and recovery before changing production equipment.
Read guide ↗
Setup and maintenance
Reading ASIC logs and preparing a support report
Turn an error message into a reproducible incident with timestamps, context and a clear next step.
Read guide ↗
Setup and maintenance
Monitoring a mining farm: useful metrics and alerts
Track each physical miner and make alerts actionable instead of collecting an unreadable stream of numbers.
Read guide ↗
Security and payouts
Securing the mining network and remote access
Reduce exposure of miner controls and keep administration separate from ordinary network traffic.
Read guide ↗
Security and payouts
Setting up and verifying a mining payout wallet
Confirm the destination, protect recovery information and reconcile the first payout before scaling up.
Read guide ↗
Choosing equipment
Planning the electrical capacity of a mining farm
Build a load inventory and give an electrician the information needed to assess a continuous mining load.
Read guide ↗
Mining economics
Measuring mining electricity costs correctly
Reconcile watts, kilowatt-hours and the electricity bill without counting the same expense twice.
Read guide ↗
Cooling and heat
Airflow for ASIC racks: keep hot exhaust away from intakes
Plan an air path, inspect recirculation and verify cooling under sustained operation.
Read guide ↗
Cooling and heat
Reusing mining heat: calculate useful output and seasonal value
Assess a heat recovery project using actual demand, auxiliary costs and an independent backup heat source.
Read guide ↗
Cooling and heat
Hydro-cooled miners: requirements before commissioning
Check the complete cooling circuit, water specifications and failure response before starting the hardware.
Read guide ↗
Cooling and heat
Immersion cooling: evaluate compatibility and total cost
Compare a complete immersion installation with air cooling instead of treating the tank as the whole project.
Read guide ↗
Mining economics
Low-power modes and autotuning: compare net results
Evaluate an approved operating profile using accepted work, measured energy and stability.
Read guide ↗
Choosing equipment
Buying a used ASIC: inspection and acceptance checklist
Verify the exact unit, sustained performance and repair history before agreeing on acceptance.
Read guide ↗
Setup and maintenance
Packing, transporting and storing an ASIC
Preserve the equipment condition and the evidence needed for a delivery or repair claim.
Read guide ↗
Mining economics
Measuring downtime and lost mining production
Separate planned stops, faults and missing data so availability reports support real operational decisions.
Read guide ↗
Setup and maintenance
Building a reliable ASIC inventory and maintenance record
Connect models, serial numbers, workers and service history so the farm remains manageable as it grows.
Read guide ↗
Mining economics
Repair or replace an ASIC: a structured decision
Compare repair cost, downtime, efficiency and uncertainty using the same planning period.
Read guide ↗No matching guides. Try another search or topic.