
ASIC.TOOLS / Model overview
Hammer Miner Hammer Miner DC06
- Hashrate
- 330 MH/s
- Power
- 90 W
Current-generation model listed by the manufacturer; exact stock and shipment timing were not confirmed.
Manuals & firmware
Everything you need to set up and maintain this miner.
Check the model and control-board revision before installing.
Specifications
- Manufacturer
- Hammer Miner
- Algorithm
- Scrypt
- Year listed in catalogue
- 2025
- Cooling
- Air cooling
- Noise
- 35 dB
- Weight
- 2 kg
Operating profiles
- Hashrate
- 330 MH/s
- Power
- 90 W
Network & access
- Default IP / address mode
- 192.168.4.1 (initial Wi-Fi setup); then DHCP
- Default username
- Not required by the documented web interface
- Default password
- Not required by the documented web interface
How to find the miner
Connect to the setup Wi-Fi shown by the device QR code and open 192.168.4.1; after setup, read the DHCP address on the display or router
Change the factory password immediately after first login. Firmware and used equipment may have different credentials.
2026-09-26 · Verification source ↗
Sources & configuration notes
Power figures refer to the listed profile. External pumps, cooling and infrastructure are not included.
Release dates describe a model or batch in the source catalogue, not necessarily the first launch of the series. Verify the exact configuration with the manufacturer.
Hammer Miner’s current product page specifies 330 MH/s on Scrypt, 90 W, Ethernet/Wi-Fi, 12 V DC input, 220 × 150 × 80 mm, 2.0 kg and noise below 35 dB. A second data object bundled in the same official site says 92 W, while the upstream aggregator alternates between 105 and 120 W. The catalogue uses the repeated visible product-card/specification value of 90 W and discloses the conflict. An official June 2025 manufacturer blog entry proves the model existed then; the later August 2026 aggregator date is not treated as the original launch.
2026-09-26 · Hammer Miner official product page ↗


