ASIC.TOOLS / Model overview

Hammer Miner BC08

SHA-2562026Air cooling

Hashrate: 12 TH/s
Power: 210 W

Manuals & firmware

Everything you need to set up and maintain this miner.

Manufacturer manual

A manufacturer PDF has not been found for this model.

View documentation source ↗

Firmware

Versions listed: 4 Exact model

Choose a version

Check the model and control-board revision before installing.

Specifications

Manufacturer: Hammer Miner
Algorithm: SHA-256
Year listed in catalogue: 2026
Cooling: Air cooling
Noise: Not specified
Weight: 1.505 kg

Operating profiles

SHA-256

Hashrate: 12 TH/s
Power: 210 W

Network & access

Default IP / address mode: 192.168.4.1 (initial Wi-Fi setup); then DHCP
Default username: Model-specific value was not confirmed. Check the device label and installed firmware.
Default password: Model-specific value was not confirmed. Check the device label and installed firmware.

How to find the miner

Scan the QR code on the device screen; open 192.168.4.1 on its setup Wi-Fi; later read the assigned address on screen/router

Change the factory password immediately after first login. Firmware and used equipment may have different credentials.

2026-09-17 · Verification source ↗

Sources & configuration notes

Power figures refer to the listed profile. External pumps, cooling and infrastructure are not included.

Release dates describe a model or batch in the source catalogue, not necessarily the first launch of the series. Verify the exact configuration with the manufacturer.

Manufacturer figures: 12 TH/s, 210 W. Their advertised 16 J/TH does not equal 210 ÷ 12 = 17.5 J/TH; the calculator uses 210 W. Catalogue year 2026 follows the secondary index; exact first shipment date is unconfirmed. Official setup guide gives 192.168.4.1 only during Wi-Fi onboarding, followed by the assigned network address. Stratum password is a pool setting, not a web login password. Four exact-model official firmware releases are locally archived.

2026-09-17 · Hammer Miner ↗